Affirmative YEStablet 7375 Guide de l'utilisateur télécharger pdf (Page 32)

YEStablet 7375 User Guide

ActiveSync

ActiveSync uses a USB connection between the host PC and the USB Slave port on the cradle of the 7375. It also

requires the installation of the Microsoft ActiveSync utility on the host PC. The procedure is:

1. Install ActiveSync 3.5 or higher on host PC.

E.g.,

http://www.microsoft.com/mobile/pocketpc/downloads/activesync37.asp

2. Securely seat the 7375 on the Cradle.

3. Connect the USB cable between the 7375’s Cradle and the host PC.

4. Enable the USB connection by engaging the appropriate (#6, per Button Function Table) button on the 7375.

The PC’s Connection window should appear indicating connection status or be accessible via the corresponding

icon on the PC System Tray.

5. Use the ActiveSync application to select and initiate the files/software transfer.

6. You may initiate the disconnect process by unplugging the USB cable.

NOTE: Suspend/Resume or removing 7375 from Cradle turns off the connection between the 7375 and the host

PC. The Cradle Enable button (#6) must be used again to re-establish the connection.

Software Installation

Software installation files can be moved to the 7375 using any of the file transfer method discussed in

File Transfer

and Storage. However, any files not located in the Internal Storage folder will be lost if a Power Off is executed.

Therefore, installing files in this fashion is best suited to testing new applications or utilities in the 7375

environment. For permanent availability and usage of new software, contact Affirmative Computer Products to

arrange a custom firmware build including your new software.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 109 110

Pas de commentaire

Affirmative YEStablet 7375 Guide de l'utilisateur Page 32