Affirmative YEStablet 7375 Guide de l'utilisateur télécharger pdf (Page 19)

YEStablet 7375 User Guide--Requirements

REQUIREMENTS

The 7375 features a CompactFlash (CF) slot and a PCMCIA slot. It is anticipated that the PCMCIA interface will

be mostly used to provide the wireless LAN connectivity using either an 802.11b wireless LAN adapter or a Sierra

wireless cellular adapter. The 7375 may also support dialup modem, tethered Ethernet connectivity, and wireless

WAN access.

The 7375 supports offline applications and deployment. However, you may choose to have (as base stations)

802.11b wireless Access Points or Gateways with network (Internet, Intranet, etc.) access to experience the full

capability of the 7375. If your 7375 does not come with a wireless LAN (802.11b) adapter (see OPERATION

NOTES), the 7375 should be used together with an approved wireless network adapter for network access. Please

check with your tablet provider for the appropriate solution.

NOTE: If you elect to use a WLAN adapter where the vendor offers a driver to operate under Windows CE .NET

on an ARM/XScale processor-based platform, you should be able to install the driver onto the 7375 by referring to

the “Software Installation, Development, Synchronization” section in this document. However, software drivers

installed in this manner will need to be re-installed should you clear the system’s volatile memory during a Cold

Reboot process.

Notes for setting up the 802.11b-based wireless communication

• Under the zero configuration design of the wireless 802.11b LAN support under CE .NET, the 7375 will detect

all 802.11b base stations in the vicinity for you to select the base station of your choice for connection.

• The ESSID and WEP Key (if enabled) on the 7375 and the base stations have to match. Zero configuration

will guide the ESSID setup. WEP is “Disabled” as default on the 7375 – it is recommended that you enable

WEP encryption for secure access.

• Click on the wireless LAN icon (see figures below) on the Windows CE Taskbar, to configure the wireless

adapter in the 7375.

• Refer to the base station operating manuals for setting up the 802.11b base stations.

• NOTE: The WLAN network connectivity icon changes appearance as in the following:

Connection Established Connection Lost

(Blinking icon indicates activity)

• NOTE: You will not see any of the icons above in the Taskbar if the network adapter is not detected or

supported by the 7375.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 109 110

Pas de commentaire

Affirmative YEStablet 7375 Guide de l'utilisateur Page 19